How to clean the aquarium in 7 easy steps

7 Steps to follow in order to clean the aquarium the easy way

Why do you need to learn how to clean the aquarium properly?

Just like being a proud owner of anything, you will have to learn how to clean an aquarium properly.

Fish need oxygen to breathe. The more dirt and grime swims around in the aquarium, the less oxygen the water can hold, which in turn endangers the survival of the fish.

In addition, dirty aquarium water is an ideal breeding ground for algae to develop. When algae die, they use up a large amount of oxygen and in extreme cases can deprive the water of all oxygen.

To ensure the health of the fish, it is important to clean it thoroughly at least every two weeks. There are of course differences, depending on the type of fish and the nature of the aquarium. Our guide will help you with the general cleaning of the aquarium.

If you maintain your aquarium regularly, you will not only enjoy it longer, but you can also be certain that your fish are happy and healthy. In addition, minor maintenance measures facilitate the major plastering and thus your time expenditure.

How to clean the aquarium in 7 easy steps

How to clean the aquarium: Step 1 – Change the water

The cleaning of the aquarium begins with the water change.

Change the water by directing the required amount into a bucket using an aquarium hose with a suction aid.

Under no circumstances should you replace all the water at once, as this could endanger the fish. An abrupt change in the habitat irritates the fish and can become sick or even die.

If you clean your aquarium regularly, you only need to change around 15 percent of the water each time you change the water. If you haven’t changed for a while, you should change around 25 percent of the water. If you are unsure, ask a specialist. This is how you can clean your aquarium:

How To Perform A Water Change On An Aquarium

How to clean the aquarium: Step 2 – Discard the extracted water and the tank with the same amount of fresh water

Discard the extracted water and then fill the bucket with the same amount of fresh water. You should make sure that the water is at the appropriate temperature for your fish (around 18 degrees for cold water fish and 25 degrees for tropical fish).

Be sure to use a thermometer to determine the water temperature. You should also make sure that the bucket and hose that you use to change the water are only used for this purpose. In any case, it should be free of any cleaning agents.

Safe and easy ways to start a siphon for aquarium water changes

How to clean the aquarium: Step 3 – Clean the algae from the inside of the tank

Eliminate algae and bacteria, clean aquarium filters

Eliminating algae from your aquarium is relatively easy. All you need is an algae magnet, available at most pet stores.

Wipe the algae magnet along the inside of the glass to remove the algae. To remove more stubborn accumulations of algae, you can also carefully brush along the glass with a clean brush with hard bristles.

Avoid using sharp objects to remove algae, such as razor blades. These can damage the glass and also be dangerous for the fish if you leave them in the tank during cleaning.

HOW TO Remove Algae in SECONDS!

How to clean the aquarium: Step 4 – Remove bacteria from the tank

To remove bacteria, you need to devote yourself to the sand or gravel and decorations in the aquarium.

To remove bacteria from the gravel, hold the aquarium hose about an inch above its surface while someone gently runs their fingers through the gravel. This movement brings old food scraps and dirt to the surface, from which they are then sucked off with the help of the hose.

How to clean cloudy water in aquarium | Bacteria bloom explained | Reason and fixes

How to clean the aquarium: Step 5 – Clean all the decorations in the aquarium

To clean decorations, remove them and wash them with an effective detergent. Wash them off thoroughly with clean water before putting the parts back in the aquarium.

How to Clean Fish Tank Decorations

How to clean the aquarium: Step 6 – Clean or replace the filter

Don’t forget to clean the aquarium filter every now and then. How often this should happen depends on a number of factors. Usually, however, once a month should be sufficient.

Remove the filter, disassemble it into individual parts and then carefully clean them with clean water. Under no circumstances use detergents or hot water; this would also kill the beneficial bacteria sitting in the filter.

How To: EASILY clean an Aquarium Filter!

How to clean the aquarium: Step 7 – Clean the outside of the aquarium glass

When you have finished cleaning the inside of the aquarium, move on to the outside of the glass. The cleaning is based on the same principle as cleaning the window.

Wipe the glass with a damp rag and some vinegar to remove dirt and fingerprints. Let everything dry and then polish with a soft cloth.

To remove more stubborn stains, use an effective glass cleaner to clean the outside of the aquarium glass so that you can see your little friends even better.

How to clean the aquarium glass (outside)

Factors you need to consider in order to clean the aquarium – this is how you do it

Although it might seem like a lot of work, there are a few tips and tricks that you can learn that will make cleaning the aquarium easier.

How to clean an aquarium on a daily basis

The filter is crucial for a balanced ecosystem in the aquarium. You clean the aquarium pump approximately every three weeks.

Below are important details that you have to consider when you clean the aquarium daily:

  • If you decide to wear gloves when cleaning the aquarium, make sure that the gloves have no treated surfaces. Tiny nanoparticles are detached very quickly and then contaminate the water, which under certain circumstances can lead to fish death.
  • Clean your aquarium every day with a net. With the net, you can quickly remove coarse dirt such as dead plant residues and any leftover food.
  • When you clean an aquarium, you have to check the functionality of the most important equipment such as the filter, the CO2 pump and the heater.
  • After you have finished cleaning the aquarium, make sure you check whether your fish are healthy.
  • You should clean the panes about every four to five days so that no annoying algae or limescale deposits form in the first place. Cleaning magnets have proven effective for cleaning the inside of the aquarium. With the cleaning magnet, you can easily clean the inside of the pane without reaching into the water. Alternatively, you can use an algae sponge or handle cleaner. With the handle cleaner in particular, you have to be careful not to scratch the panes. A microfiber cloth is ideal for cleaning the outside of the panes.
  • Make sure you check the water quality very regularly, about every three days. You can use test strips for this, but they are relatively expensive in the long run. Alternatively, you can use a digital water tester, which you can get from specialist retailers for around 30 euros.
  • In a saltwater aquarium, it is best to check the ratio of water and salt with a density meter daily or at least every two days. If the salt content increases extremely due to the evaporated water, the fish and the plants are quickly damaged.
How to clean an aquarium

How to clean an aquarium on a weekly basis

Pay special attention to the regular cleaning of the filter, as the pump is very important for the entire ecosystem of your pool. You clean the aquarium pump approximately every three weeks.

  • Once a week, remove debris from the bottom of the aquarium, such as fish droppings, leftover food or dead plant parts, using a sludge bell. Hang the hose of the sludge bell in a container, as it happens occasionally that smaller fish slide through the sludge bell. It would be unpleasant if the fish then disappeared through the drain of a sink. Before you discard the contents of the container, make sure that none of your fish have tried to escape.
  • Once you have decorated your aquarium, remove the decoration about every two weeks and clean it in lukewarm water.
  • You won’t be able to avoid a regular water change every one to two weeks either. However, never replace all of the water in the aquarium, only 20 to a maximum of 30 percent. Put the tap water with a water conditioner and make sure that the water to be refilled has the same temperature as the water in the pool.
  • In a saltwater aquarium, changing the water is somewhat more complex than in a freshwater aquarium. You need distilled water and special sea salt. After you have filled the water into a suitable container, add the right amount of sea salt for your aquarium and mix it with the water. Then let the mixture stand for about 24 hours.
  • Before you finally pour the sea water into the pool, first check the density and bring the water to the right temperature. In saltwater aquariums, the water temperature is usually between 24 and 28 degrees. In addition, check whether the pH value of the newly added water is identical to the pH value of the aquarium water.

Things NOT TO FORGET when you are cleaning the aquarium

  • Do not forget! Before using cleaning agents, you should always read the manufacturer’s instructions carefully and use gloves. To be absolutely sure, you can first test the product on a small area.
  • Never change all the water in the tank at once, only about 15 – 25 percent at a time. Remove algae with an algae magnet.Clean the filter by removing it and dismantling it into individual parts. You can clean the outside of the glass, just like yours

2 Trackbacks / Pingbacks

  1. Fish Tank: #1 Easy Guide For Beginners | Honey Gourami
  2. The 9 Most Important Water Values In A Saltwater Aquarium | Honey Gourami

Leave a Reply

Your email address will not be published.


*